Menu
DESCRIPTION
VIFLY StoreSafe is a smart lipo battery discharger that can intelligently discharge your battery to storage voltage. With a built-in advanced algorithm and the temperature sensor, it can keep the highest discharge rate in an appropriate temperature range. The heatsink would effectively dissipate the heat to prevent the discharger from overheating.
Note: Before using StoreSafe, please make sure that the voltage of each battery cell is higher than 3.95V. After plugging in the battery, the LED that indicates the status will flash for about 5 seconds and then enter the discharging state. If the LED status does not indicate correctly, please disconnect the battery immediately. The StoreSafe will stop discharging when your battery reaches storage voltage (3.85V±0.08V / cell) and then goes into an ultra-low leakage current (<10uA)
Intelligently Discharging LiPo Battery to Storage Voltage
Never keep your battery at the full voltage considering the safety issue and battery life. VIFLY StoreSafe would be the best solution to discharge and maintain your lipo batteries. With the advanced algorithm and built-in temperature sensor, the VIFLY StoreSafe lipo battery discharger can intelligently adjust the discharge speed according to the battery voltage and unit temperature. It ensures the highest discharge rate in an appropriate temperature range.
Heatsink to Cool Down the Discharger
In addition to the built-in temperature sensor to control the unit temp, the heatsink would effectively dissipate the heat to prevent the discharger from overheating.
Automatically Identity 2S to 6S Batteries
VIFLY StoreSafe lipo discharger can be compatible with 2S to 6S batteries. When plugin, VIFLY StoreSafe would recognize the battery type automatically, no need to do any extra setting to select different battery types, so simple and convenient.
Easy-to-use, Plug-in and Leave it Alone
The StoreSafe will stop discharging when your battery reaches storage voltage and then goes into an ultra-low leakage current so the unit can be left for a long time without over-discharging the battery. Just plugin and leave it alone.
Operation:
Specifications
- Working Voltage: 7.9 – 26V(2S-6S)
- Discharging Power: 1W
- Turn-off Current: < 10uA
- Storage Voltage: 3.85V±0.08V / cell
- Connector: XT60
- Weight: 8g
- Size: 37 x 16 x 10 mm(XT60)
Video
Includes
- 1 x VIFLY StoreSafe Smart Lipo Battery Discharger
Related products
-
Out of stock
DJI FPV Air Unit
190 $ SKU: 1002Add to cart -
Back order
UP610
80 $ SKU: 1031Add to cart -
Replacement DJI FPV Goggles V2 Sponge Foam Padding
25 $ SKU: 1006Add to cart -
Out of stock
Flywoo Mr.Croc 5‘/6’/7’ HD Frame Kit
80 $ SKU: 1003Select options This product has multiple variants. The options may be chosen on the product page