The Lumenier ZIP V2 motor line continues to grow with the addition of the ZIP V2 2305 Motor. With three different KV options to choose from, you’ll have a ZIP V2 to match every setup! This motor features a lightweight M3 shaft with an additional aluminum spacer that goes from M3 to M5 for universal propeller mounting. Just screw this spacer to the hub of the motor and then use your regular M5 propeller.

LUMENIER ZIP V2 MOTOR SERIES

The ZIP V2 series by Lumenier is the culmination of years of FPV drone motor manufacturing experience. The ZIP V2 motors feature top-of-the-line components and powerful N52SH curved magnets for maximum power and the highest temperature rating. This gives you the best-performing motor for your racing or freestyle drone. Lumenier has always been known for its silky smooth motors, and the ZIP motors are no exception. Each motor is dynamically balanced and tested at the factory to ensure a smooth and perfectly running motor out of the box, resulting in clear and jello-free flight footage.

CINEMATIC SERIES

The new Cinematic Motors in the ZIP V2 series are purposefully built with the professional cinematographer in mind. The ZIP V2 Cinematic motors feature an all-black matte finish to seamlessly blend into the background, not drawing any unwanted attention to your drone during shoots. Additionally, the ZIP V2 motors feature premium components for top-of-the-line performance and extra reliability. Lumenier motors are guaranteed to give you the best so you can get the job done right.

V2 UPDATES

ZIP V2 motors feature premium components for top-of-the-line performance and extra reliability. Lumenier motors are guaranteed to give you the best so you can get the job done right.

• Upgraded Light-Weight Bell Design
• Same incredible performance
• Ultra-Lightweight Shaft

• Uses Traditional Propellers of M3 or M5 ID
• Dynamically Balanced to Extreme Precision
• Lightweight Motor at 24g
• Japanese NSK Bearings
• Ultra-Lightweight Shaft
• Upgraded Bell Design
• AL 7075 Base Casing

• Mounting: M3 shaft with an additional aluminum spacer that goes from M3 to M5 for universal propeller mounting.
• Stator: 0.15mm Nippon steel silicone steel
• KV: Choose 1800KV OR 2400KV
• Bearings: Japanese NSK 5x2x2.5
• Wire AWG: 20AWG wire
• Rotor: N52H arc magnets
• Bolt Pattern: 16x16mm
• Configuration: 9N12P
• Base casing: Al 7075
• Bell cap: Al 7075
• Prop shaft: 3mm
• Weight: 24g

• 1x Lumenier ZIP V2 2305 Cinematic Motor (1800KV, 2400KV Options)
• 4x Mounting Screws (M3x8  Socket Cap)
• 1x M3 locking Prop Nut
• 1x 5m to 3m Aluminum Reducer