The Lumenier LUX H743 – NDAA Flight Controller features some of the latest sensors in drone technology, including the next-generation InvenSense ICM-45686 Gyro/Accelerometer, Infineon DPS368 barometer, and STMicroelectronics LIS2MDL magnetometer. Additionally, the LUX H743–NDAA features several differentiating characteristics, including a camera feed switch that allows toggling between two independent video streams.

VIDEO: NDAA Compliant 8s Stack for FPV Drone Builds: Lumenier Lux FC & Siege ESC

• Dual Gyro/Accelerometer Sensors with Synchronization Clock Signal and Independent Power Supplies
• Supported Firmware – Betaflight, INAV, Ardupilot, and PX4
• 7 UART Ports, Including 2 UARTs with Flow Control
• Internal Magnetometer
• NDAA Compliant
• LED supported

• Input Voltage: 3S to 8S
• MCU: ST STM32H743, ARM® Cortex®- M7, 480MHz, 1MB RAM, 2MB Flash
• Gyro/Accelerometer #1: Invensense ICM-45686
• Gyro/Accelerometer #2: Invensense ICM-42688-P
• Barometer: Infineon DPS368
• Magnetometer: STMicroelectronics LIS2MDL
• Flash Storage: Windbond W25Q128JV (128Mbit)
• OSD: AT7456E
• Size: 37.5mm x 37.5mm
• Mounting holes: 30.5mm x 30.5mm
• External Sensors: I2C Ports
• CANbus Support: PX4 and Ardupilot only
• LED Strip Control: WS2812
• Voltage regulators: +5V Regulator for Accessories, +10V Regulator for VTX Power
• Camera Control Output: Supported
• Dual Camera Switch: Supported
• VTX Power Switch: Supported
• RX PPM Input: Supported
• Analog Battery Sensor Input: 8S and 12S Inputs
• Analog Current Sensor Input: Supported
• Blackbox Storage: SD Card and Flash
• USB: Type-C (2.0)
• Pixhawk Telemetry: GPS and CAN Ports

MANUAL

• Lumenier LUX H743 FC Manual

NDAA DECLARATION

• Lumenier NDAA Product Declaration – LUX H743 Flight Controller

FIRMWARE

• PX4:
  • Firmware Install
• INAV:
  • Firmware Install
• Betaflight:
  • Firmware Install
• Ardupilot:
  • Firmware Install

• 1x Lumenier LUX H743 Flight Controller – NDAA