The Lumenier Razor LED ESC is a high-performance 32-bit ESC with powerful F4 processors and AM32 firmware, delivering faster input signals, lower latency, and live telemetry for advanced flight controllers. It features 4x onboard RGB LEDs with a pre-programmed controller. Press the button to cycle through 13 color options and patterns. The ESC also acts as a distribution board for four additional LED strips, all synced to the onboard controller. The built-in 5V regulator powers the LEDs, making setup easy—just press a button to change colors!

Note: LED arms sold seperately.

• DSHOT 1200, Proshot, Oneshot125, Oneshot42, and Multishot Support
• Powerful Regenerative and Active Braking
• Synchronous Rectification Technology
• 2-6S LiPo Battery Compatibility
• Built-in 5V Regulator
• Onboard RGB LEDs
• AM32 Firmware
• Adaptive Timing
• F4 MCU

UPGRADE YOUR LUMENIER RAZOR LED ESC WITH ADDITIONAL RGB ARM LEDS

The Lumenier Razor LED ESC is compatible with other RGB addressable LEDs, allowing you to add up to 4 more LED strips to your quad! The ESC has a built-in 5V regulator that powers additional LEDs and automatically sends the signal for the color/pattern at the push of a button.

• 8-Pin Connector Pinout: VBAT, Ground, Current ADC, TLM, Motor 1, Motor 2, Motor 3, Motor 4
• Mounting Holes: 30.5×30.5 mm (M4, M3 with rubber inserts)
• Constant Current: 55 Amps
• Dimensions: 39x45x5 mm
• Signal Wire Length: 7 cm
• Burst Current: 55 Amps
• Input: 2-6S LiPoly
• Weight: 15g

•  Download the latest AM32 configurator and user manual here

• 1x Lumenier Razor LED F4 55A 2-6S AM32 4-in-1 ESC – 30×30
• 1x 8-Pin Micro JST-SH 7cm connector
• 1x 1000uf 35V Capacitor
• 1x Hardware Set